USB RFID reader project

This page is rather sparse at the moment. Your patience is appreciated.

Hardware overview

  • Atmel AT90USB162
  • Phillips HTRC110 RFID read/write frontend

Current status

  • Fairly usable USB interface
  • Reads EM4102 tags
  • Supports UID REQUEST for HITAG-S tags (reads my implant!)

To-do

  • Implement more HITAG protocol functionality (EEPROM access, challenge/response, etc.)
  • Build a read coil that's a better match for ampoule-type tags

©2014 Greg Courville